Jacobian coordinates for Weierstrass curves #
This file defines the type of points on a Weierstrass curve as a tuple, consisting of an equivalence
class of triples up to scaling by weights, satisfying a Weierstrass equation with a nonsingular
condition. This file also defines the negation and addition operations of the group law for this
type, and proves that they respect the Weierstrass equation and the nonsingular condition. The fact
that they form an abelian group is proven in Mathlib.AlgebraicGeometry.EllipticCurve.Group
.
Mathematical background #
Let W
be a Weierstrass curve over a field F
. A point on the weighted projective plane with
weights $(2, 3, 1)$ is an equivalence class of triples $[x:y:z]$ with coordinates in F
such that
$(x, y, z) \sim (x', y', z')$ precisely if there is some unit u
of F
such that
$(x, y, z) = (u^2x', u^3y', uz')$, with an extra condition that $(x, y, z) \ne (0, 0, 0)$.
A rational point is a point on the $(2, 3, 1)$-projective plane satisfying a $(2, 3, 1)$-homogeneous
Weierstrass equation $Y^2 + a_1XYZ + a_3YZ^3 = X^3 + a_2X^2Z^2 + a_4XZ^4 + a_6Z^6$, and being
nonsingular means the partial derivatives $W_X(X, Y, Z)$, $W_Y(X, Y, Z)$, and $W_Z(X, Y, Z)$ do not
vanish simultaneously. Note that the vanishing of the Weierstrass equation and its partial
derivatives are independent of the representative for $[x:y:z]$, and the nonsingularity condition
already implies that $(x, y, z) \ne (0, 0, 0)$, so a nonsingular rational point on W
can simply be
given by a tuple consisting of $[x:y:z]$ and the nonsingular condition on any representative.
In cryptography, as well as in this file, this is often called the Jacobian coordinates of W
.
As in Mathlib.AlgebraicGeometry.EllipticCurve.Affine
, the set of nonsingular rational points forms
an abelian group under the same secant-and-tangent process, but the polynomials involved are
$(2, 3, 1)$-homogeneous, and any instances of division become multiplication in the $Z$-coordinate.
Note that most computational proofs follow from their analogous proofs for affine coordinates.
Main definitions #
WeierstrassCurve.Jacobian.PointClass
: the equivalence class of a point representative.WeierstrassCurve.Jacobian.toAffine
: the Weierstrass curve in affine coordinates.WeierstrassCurve.Jacobian.Nonsingular
: the nonsingular condition on a point representative.WeierstrassCurve.Jacobian.NonsingularLift
: the nonsingular condition on a point class.WeierstrassCurve.Jacobian.neg
: the negation operation on a point representative.WeierstrassCurve.Jacobian.negMap
: the negation operation on a point class.WeierstrassCurve.Jacobian.add
: the addition operation on a point representative.WeierstrassCurve.Jacobian.addMap
: the addition operation on a point class.WeierstrassCurve.Jacobian.Point
: a nonsingular rational point.WeierstrassCurve.Jacobian.Point.neg
: the negation operation on a nonsingular rational point.WeierstrassCurve.Jacobian.Point.add
: the addition operation on a nonsingular rational point.WeierstrassCurve.Jacobian.Point.toAffineAddEquiv
: the equivalence between the nonsingular rational points on a Weierstrass curve in Jacobian coordinates with those in affine coordinates.
Main statements #
WeierstrassCurve.Jacobian.NonsingularNeg
: negation preserves the nonsingular condition.WeierstrassCurve.Jacobian.NonsingularAdd
: addition preserves the nonsingular condition.
Implementation notes #
A point representative is implemented as a term P
of type Fin 3 → R
, which allows for the vector
notation ![x, y, z]
. However, P
is not syntactically equivalent to the expanded vector
![P x, P y, P z]
, so the lemmas fin3_def
and fin3_def_ext
can be used to convert between the
two forms. The equivalence of two point representatives P
and Q
is implemented as an equivalence
of orbits of the action of Rˣ
, or equivalently that there is some unit u
of R
such that
P = u • Q
. However, u • Q
is not syntactically equal to ![u² * Q x, u³ * Q y, u * Q z]
, so the
lemmas smul_fin3
and smul_fin3_ext
can be used to convert between the two forms.
References #
[J Silverman, The Arithmetic of Elliptic Curves][silverman2009]
Tags #
elliptic curve, rational point, Jacobian coordinates
Weierstrass curves #
An abbreviation for a Weierstrass curve in Jacobian coordinates.
Equations
Instances For
The coercion to a Weierstrass curve in Jacobian coordinates.
Equations
- W.toJacobian = W
Instances For
Jacobian coordinates #
The multiplicative action on a point representative.
Equations
- WeierstrassCurve.Jacobian.instMulActionPoint = MulAction.mk ⋯ ⋯
Instances For
The equivalence setoid for a point representative.
Equations
- WeierstrassCurve.Jacobian.instSetoidPoint = MulAction.orbitRel Rˣ (Fin 3 → R)
Instances For
The equivalence class of a point representative.
Equations
Instances For
The coercion to a Weierstrass curve in affine coordinates.
Equations
- W'.toAffine = W'
Instances For
Weierstrass equations #
The polynomial $W(X, Y, Z) := Y^2 + a_1XYZ + a_3YZ^3 - (X^3 + a_2X^2Z^2 + a_4XZ^4 + a_6Z^6)$
associated to a Weierstrass curve W'
over R
. This is represented as a term of type
MvPolynomial (Fin 3) R
, where X 0
, X 1
, and X 2
represent $X$, $Y$, and $Z$ respectively.
Equations
- One or more equations did not get rendered due to their size.
Instances For
The proposition that a point representative $(x, y, z)$ lies in W'
.
In other words, $W(x, y, z) = 0$.
Equations
- W'.Equation P = ((MvPolynomial.eval P) W'.polynomial = 0)
Instances For
Nonsingular Weierstrass equations #
The partial derivative $W_X(X, Y, Z)$ of $W(X, Y, Z)$ with respect to $X$.
Equations
- W'.polynomialX = (MvPolynomial.pderiv 0) W'.polynomial
Instances For
The partial derivative $W_Y(X, Y, Z)$ of $W(X, Y, Z)$ with respect to $Y$.
Equations
- W'.polynomialY = (MvPolynomial.pderiv 1) W'.polynomial
Instances For
The partial derivative $W_Z(X, Y, Z)$ of $W(X, Y, Z)$ with respect to $Z$.
Equations
- W'.polynomialZ = (MvPolynomial.pderiv 2) W'.polynomial
Instances For
The proposition that a point representative $(x, y, z)$ in W'
is nonsingular.
In other words, either $W_X(x, y, z) \ne 0$, $W_Y(x, y, z) \ne 0$, or $W_Z(x, y, z) \ne 0$.
Note that this definition is only mathematically accurate for fields.
Equations
- W'.Nonsingular P = (W'.Equation P ∧ ((MvPolynomial.eval P) W'.polynomialX ≠ 0 ∨ (MvPolynomial.eval P) W'.polynomialY ≠ 0 ∨ (MvPolynomial.eval P) W'.polynomialZ ≠ 0))
Instances For
The proposition that a point class on W'
is nonsingular. If P
is a point representative,
then W'.NonsingularLift ⟦P⟧
is definitionally equivalent to W'.Nonsingular P
.
Equations
- W'.NonsingularLift P = Quotient.lift W'.Nonsingular ⋯ P
Instances For
Negation formulae #
Doubling formulae #
The unit associated to the doubling of a 2-torsion point.
More specifically, the unit u
such that W.add P P = u • ![1, 1, 0]
where P = W.neg P
.
Equations
- W'.dblU P = (MvPolynomial.eval P) W'.polynomialX
Instances For
The $Z$-coordinate of the doubling of a point representative.
Instances For
The $X$-coordinate of the doubling of a point representative.
Equations
Instances For
The $Y$-coordinate of the negated doubling of a point representative.
Equations
Instances For
The $Y$-coordinate of the doubling of a point representative.
Equations
- W'.dblY P = W'.negY ![W'.dblX P, W'.negDblY P, W'.dblZ P]
Instances For
The coordinates of the doubling of a point representative.
Equations
- W'.dblXYZ P = ![W'.dblX P, W'.dblY P, W'.dblZ P]
Instances For
Addition formulae #
The $X$-coordinate of the addition of two distinct point representatives.
Equations
- One or more equations did not get rendered due to their size.
Instances For
The $Y$-coordinate of the negated addition of two distinct point representatives.
Equations
- One or more equations did not get rendered due to their size.
Instances For
The $Y$-coordinate of the addition of two distinct point representatives.
Equations
- W'.addY P Q = W'.negY ![W'.addX P Q, W'.negAddY P Q, WeierstrassCurve.Jacobian.addZ P Q]
Instances For
The coordinates of the addition of two distinct point representatives.
Equations
- W'.addXYZ P Q = ![W'.addX P Q, W'.addY P Q, WeierstrassCurve.Jacobian.addZ P Q]
Instances For
Negation on point representatives #
The negation of a point representative.
Equations
- W'.neg P = ![P 0, W'.negY P, P 2]
Instances For
The negation of a point class. If P
is a point representative,
then W'.negMap ⟦P⟧
is definitionally equivalent to W'.neg P
.
Equations
- W'.negMap P = Quotient.map W'.neg ⋯ P
Instances For
Addition on point representatives #
The addition of two point representatives.
Instances For
The addition of two point classes. If P
is a point representative,
then W.addMap ⟦P⟧ ⟦Q⟧
is definitionally equivalent to W.add P Q
.
Equations
- W'.addMap P Q = Quotient.map₂ W'.add ⋯ P Q
Instances For
Nonsingular rational points #
A nonsingular rational point on W'
.
- point : WeierstrassCurve.Jacobian.PointClass R
The point class underlying a nonsingular rational point on
W'
. - nonsingular : W'.NonsingularLift self.point
The nonsingular condition underlying a nonsingular rational point on
W'
.
Instances For
The nonsingular condition underlying a nonsingular rational point on W'
.
Equations
- WeierstrassCurve.Jacobian.Point.instZeroPoint = { zero := WeierstrassCurve.Jacobian.Point.mk ⋯ }
The map from a nonsingular rational point on a Weierstrass curve W'
in affine coordinates
to the corresponding nonsingular rational point on W'
in Jacobian coordinates.
Equations
- WeierstrassCurve.Jacobian.Point.fromAffine WeierstrassCurve.Affine.Point.zero = 0
- WeierstrassCurve.Jacobian.Point.fromAffine (WeierstrassCurve.Affine.Point.some h) = WeierstrassCurve.Jacobian.Point.mk ⋯
Instances For
The negation of a nonsingular rational point on W
.
Given a nonsingular rational point P
on W
, use -P
instead of neg P
.
Equations
- P.neg = WeierstrassCurve.Jacobian.Point.mk ⋯
Instances For
Equations
- WeierstrassCurve.Jacobian.Point.instNegPoint = { neg := WeierstrassCurve.Jacobian.Point.neg }
The addition of two nonsingular rational points on W
.
Given two nonsingular rational points P
and Q
on W
, use P + Q
instead of add P Q
.
Equations
- P.add Q = WeierstrassCurve.Jacobian.Point.mk ⋯
Instances For
Equations
- WeierstrassCurve.Jacobian.Point.instAddPoint = { add := WeierstrassCurve.Jacobian.Point.add }
Equivalence with affine coordinates #
The map from a point representative that is nonsingular on a Weierstrass curve W
in Jacobian
coordinates to the corresponding nonsingular rational point on W
in affine coordinates.
Equations
- WeierstrassCurve.Jacobian.Point.toAffine W P = if hP : W.Nonsingular P ∧ P 2 ≠ 0 then WeierstrassCurve.Affine.Point.some ⋯ else 0
Instances For
The map from a nonsingular rational point on a Weierstrass curve W
in Jacobian coordinates
to the corresponding nonsingular rational point on W
in affine coordinates.
Equations
- P.toAffineLift = Quotient.lift (fun (x : Fin 3 → F) => WeierstrassCurve.Jacobian.Point.toAffine W x) ⋯ P.point
Instances For
The equivalence between the nonsingular rational points on a Weierstrass curve W
in Jacobian
coordinates with the nonsingular rational points on W
in affine coordinates.
Equations
- One or more equations did not get rendered due to their size.
Instances For
An abbreviation for WeierstrassCurve.Jacobian.Point.fromAffine
for dot notation.
Equations
- P.toJacobian = WeierstrassCurve.Jacobian.Point.fromAffine P